Can't get metaTracker sample rate to 800Hz in logging with both gyro and accel

using metabase (today's download?) on an android phone and a metaTracker (also new), if I set it to log at 800 hz with only the accelerometer, it works fine. if I do it with both accel and gyro at 800hz, it seems to top out around 700 hz.
is this a known issue, or am I doing something wrong?

Comments

  • Unfortunately both gyro and acc at 800Hz is not supported. Only 1 or the other. Otherwise you need to lower the frequency (the MCU can't handle processing that much data and the memory runs out quickly).

Sign In or Register to comment.