com.mbientlab.metawear.module

Interface Led.PatternEditor

Enclosing interface:

Led

public static interface Led.PatternEditor

Interface to edit pattern attributes

Author:

Eric Tsai

Method Summary

Modifier and Type	Method and Description
void	commit() Write the settings to the board
Led.PatternEditor	delay(short delay) Set how long to wait before starting the pattern.
Led.PatternEditor	fallTime(short time) Set how long the transition should take from high to low state, in milliseconds
Led.PatternEditor	highIntensity(byte intensity) Set the intensity value of the high state
Led.PatternEditor	highTime(short time) Set how long the pulse stays in the high state
Led.PatternEditor	lowIntensity(byte intensity) Set the intensity value of the low state
Led.PatternEditor	pulseDuration(short duration) Set the duration of one pulse
Led.PatternEditor	repeatCount(byte count) Set how many times to repeat a pulse pattern
Led.PatternEditor	riseTime(short time) Set how long the transition should take from low to high state, in milliseconds

Method Detail

highIntensity

Led.PatternEditor highIntensity(byte intensity)

Set the intensity value of the high state

Parameters:

intensity - LED intensity the high state should be in, between [0 - 31]

Returns:

Calling object

lowIntensity

Led.PatternEditor lowIntensity(byte intensity)

Set the intensity value of the low state

Parameters:

intensity - LED intensity the low state should be in, between [0 - 31]

Returns:

Calling object

riseTime

Led.PatternEditor riseTime(short time)

Set how long the transition should take from low to high state, in milliseconds

Parameters:

time - Transition time (ms) from low to high state

Returns:

Calling object

highTime

Led.PatternEditor highTime(short time)

Set how long the pulse stays in the high state

Parameters:

time - Length of time (ms) to spend in the high state

Returns:

Calling object

fallTime

Led.PatternEditor fallTime(short time)

Set how long the transition should take from high to low state, in milliseconds

Parameters:

time - Length of time (ms) from high to low state

Returns:

Calling object

pulseDuration

Led.PatternEditor pulseDuration(short duration)

Set the duration of one pulse

Parameters:

duration - Length of one pulse (ms)

Returns:

Calling object

delay

Led.PatternEditor delay(short delay)

Set how long to wait before starting the pattern. This setting is ignored on boards running firmware older than v1.2.3

Parameters:

delay - Length of the delay (ms)

Returns:

Calling object

repeatCount

Led.PatternEditor repeatCount(byte count)

Set how many times to repeat a pulse pattern

Parameters:

count - Number of repetitions, use Led.PATTERN_REPEAT_INDEFINITELY to repeat forever

Returns:

Calling object

commit

void commit()

Write the settings to the board