- enable() - Method in interface com.mbientlab.metawear.module.IBeacon
-
Enable IBeacon mode.
- enableAltitudeSampling() - Method in interface com.mbientlab.metawear.module.Bmp280Barometer
-
Enable altitude sampling
- enableAutoSleepMode() - Method in interface com.mbientlab.metawear.module.Mma8452qAccelerometer
-
Enable autosleep mode
- enableAxisSampling() - Method in interface com.mbientlab.metawear.module.Accelerometer
-
Enables sampling of the XYZ axes
- enableHighPassFilter(byte) - Method in interface com.mbientlab.metawear.module.Mma8452qAccelerometer.SamplingConfigEditor
-
Enables high-pass filtering on the accelerometer axis data and sets the high pass filter cutoff frequency.
- enableLowPassFilter() - Method in interface com.mbientlab.metawear.module.Mma8452qAccelerometer.TapConfigEditor
-
Set how the tap detection should processes the data
- enableMovementDetection(Mma8452qAccelerometer.MovementType) - Method in interface com.mbientlab.metawear.module.Mma8452qAccelerometer
-
Enables movement detection when the accelerometer is active
- enableOrientationDetection() - Method in interface com.mbientlab.metawear.module.Accelerometer
-
Enables orientation detection when the accelerometer is active
- enableShakeDetection() - Method in interface com.mbientlab.metawear.module.Mma8452qAccelerometer
-
Enables shake detection when the accelerometer is active
- enableTapDetection(Mma8452qAccelerometer.TapType...) - Method in interface com.mbientlab.metawear.module.Mma8452qAccelerometer
-
Enables tap detection when accelerometer is active
- enableThermistorMode(byte, byte) - Method in interface com.mbientlab.metawear.module.SingleChannelTemperature
-
Puts the board in thermistor mode, which uses an external thermistor to measure the temperature
rather than the sensor from the nrf chip
- end() - Method in interface com.mbientlab.metawear.DataSignal
-
Signifies an end the current branch and reverts control back to the previous split signal.
- eraseMacros() - Method in interface com.mbientlab.metawear.module.Macro
-
Removes all macros on the flash memory.
- execOnBoot() - Method in class com.mbientlab.metawear.module.Macro.CodeBlock
-
Retrieves the execute on boot status
- execute(byte) - Method in interface com.mbientlab.metawear.module.Macro
-
Executes the commands corresponding to the macro ID
- executeOnBackgroundThread() - Method in class com.mbientlab.metawear.MetaWearBleService.LocalBinder
-
Executes asynchronous tasks on a background thread.
- executeOnUiThread() - Method in class com.mbientlab.metawear.MetaWearBleService.LocalBinder
-
Executes asynchronous tasks on the UI thread
- EXT_THERMISTOR - Static variable in class com.mbientlab.metawear.module.MultiChannelTemperature.MetaWearProChannel
-
- EXT_THERMISTOR - Static variable in class com.mbientlab.metawear.module.MultiChannelTemperature.MetaWearRChannel
-