com.mbientlab.metawear.module

Interface Led.ColorChannelEditor

Enclosing interface:

Led

public static interface Led.ColorChannelEditor

Interface for configuring the color channels of the LED

Method Summary

Modifier and Type	Method and Description
void	commit() Write the settings to the board
Led.ColorChannelEditor	setDelay(short delay) How long to wait before starting the pattern.
Led.ColorChannelEditor	setFallTime(short time) How long the transition should take from high to low state, in milliseconds
Led.ColorChannelEditor	setHighIntensity(byte intensity) Intensity value of the high state
Led.ColorChannelEditor	setHighTime(short time) How long the pulse stays in the high state
Led.ColorChannelEditor	setLowIntensity(byte intensity) Intensity value of the low state
Led.ColorChannelEditor	setPulseDuration(short duration) How long one pulse is
Led.ColorChannelEditor	setRepeatCount(byte count) How many times to repeat a pulse pattern
Led.ColorChannelEditor	setRiseTime(short time) How long the transition should take from low to high state, in milliseconds

Method Detail

setHighIntensity

Led.ColorChannelEditor setHighIntensity(byte intensity)

Intensity value of the high state

Parameters:

intensity - LED intensity the high state should be in, between [0 - 31]

Returns:

Calling object

setLowIntensity

Led.ColorChannelEditor setLowIntensity(byte intensity)

Intensity value of the low state

Parameters:

intensity - LED intensity the low state should be in, between [0 - 31]

Returns:

Calling object

setRiseTime

Led.ColorChannelEditor setRiseTime(short time)

How long the transition should take from low to high state, in milliseconds

Parameters:

time - Transition time (ms) from low to high state

Returns:

Calling object

setHighTime

Led.ColorChannelEditor setHighTime(short time)

How long the pulse stays in the high state

Parameters:

time - Length of time (ms) to spend in the high state

Returns:

Calling object

setFallTime

Led.ColorChannelEditor setFallTime(short time)

How long the transition should take from high to low state, in milliseconds

Parameters:

time - Length of time (ms) from high to low state

Returns:

Calling object

setPulseDuration

Led.ColorChannelEditor setPulseDuration(short duration)

How long one pulse is

Parameters:

duration - Length of one pulse (ms)

Returns:

Calling object

setDelay

Led.ColorChannelEditor setDelay(short delay)

How long to wait before starting the pattern. This function is ignored on boards running firmware older than v1.2.3

Parameters:

delay - Length of the delay (ms)

Returns:

Calling object

setRepeatCount

Led.ColorChannelEditor setRepeatCount(byte count)

How many times to repeat a pulse pattern

Parameters:

count - Number of repetitions, set to 255 to repeat indefinitely

Returns:

Calling object

commit

void commit()

Write the settings to the board