com.mbientlab.metawear.module

Interface Tsl2671Proximity.ConfigEditor

Enclosing interface:

Tsl2671Proximity

public static interface Tsl2671Proximity.ConfigEditor

Interface for configuring the sensor

Method Summary

Modifier and Type	Method and Description
void	commit() Write the changes to the sensor
Tsl2671Proximity.ConfigEditor	setIntegrationTime(float time) Sets the integration time
Tsl2671Proximity.ConfigEditor	setPulseCount(byte nPulses) Sets the pulse count.
Tsl2671Proximity.ConfigEditor	setReceiverDiode(Tsl2671Proximity.ReceiverDiode diode) Sets the photodiode for responding to light
Tsl2671Proximity.ConfigEditor	setTransmitterDriver(Tsl2671Proximity.TransmitterDrive driveCurrent) Sets the led drive current.

Method Detail

setIntegrationTime

Tsl2671Proximity.ConfigEditor setIntegrationTime(float time)

Sets the integration time

Parameters:

time - Period of time, in milliseconds, the internal ADC converts the analog signal into digital counts. Minimum 2.72ms

Returns:

Calling object

setPulseCount

Tsl2671Proximity.ConfigEditor setPulseCount(byte nPulses)

Sets the pulse count. Sensitivity grows by the square root of the number of pulses

Parameters:

nPulses - Number of pulses to use for detection, between [1, 255]

Returns:

Calling object

setReceiverDiode

Tsl2671Proximity.ConfigEditor setReceiverDiode(Tsl2671Proximity.ReceiverDiode diode)

Sets the photodiode for responding to light

Parameters:

diode - Photodiode to use

Returns:

Calling object

setTransmitterDriver

Tsl2671Proximity.ConfigEditor setTransmitterDriver(Tsl2671Proximity.TransmitterDrive driveCurrent)

Sets the led drive current. For boards powered by the CR2032 battery, it is recommended to use 25mA or less.

Parameters:

driveCurrent - Current driving the sensor

Returns:

Calling object

commit

void commit()

Write the changes to the sensor