- I2C - Interface in com.mbientlab.metawear.module
-
Communicates with the I2C bus, providing direct access sensors connected via I2C
- I2C.SourceSelector - Interface in com.mbientlab.metawear.module
-
Selector for the I2C data sources
- I2CMessage - Class in com.mbientlab.metawear.data
-
Container class for I2C data.
- I2CMessage(byte[]) - Constructor for class com.mbientlab.metawear.data.I2CMessage
-
- I2CMessage(Calendar, byte[]) - Constructor for class com.mbientlab.metawear.data.I2CMessage
-
- IBeacon - Interface in com.mbientlab.metawear.module
-
Controller for IBeacon mode
- IBeacon.ConfigEditor - Interface in com.mbientlab.metawear.module
-
Interface for configuring IBeacon settings
- IBeacon.Configuration - Interface in com.mbientlab.metawear.module
-
Wrapper class encapsulating the IBeacon configuration settings
- id() - Method in interface com.mbientlab.metawear.module.Timer.Controller
-
Retrieve the ID representing the controller
- id() - Method in interface com.mbientlab.metawear.RouteManager
-
Retrieves the ID
- initializeStrand(byte, NeoPixel.ColorOrdering, NeoPixel.StrandSpeed, byte, byte) - Method in interface com.mbientlab.metawear.module.NeoPixel
-
Initialize memory on the MetaWear board for a NeoPixel strand
- initiateAnalogInRead(byte, Gpio.AnalogReadMode) - Method in interface com.mbientlab.metawear.module.Gpio
-
Enhanced version of the readAnalogIn functions that combines analog reads with pullup/pulldown commands
in one function.
- initiateBonding() - Method in interface com.mbientlab.metawear.module.Settings
-
Trigger the board to initiate the Bluetooth bonding process with the connected Android device
- inMetaBootMode() - Method in interface com.mbientlab.metawear.MetaWearBoard
-
Checks if the board is in MetaBoot mode
- interval() - Method in interface com.mbientlab.metawear.module.Settings.AdvertisementConfig
-
Retrieves the advertising interval
- isActive() - Method in interface com.mbientlab.metawear.module.Timer.Controller
-
Retrieves the active state
- isActive() - Method in interface com.mbientlab.metawear.RouteManager
-
Retrieves the active state of the manager.
- isComplete() - Method in interface com.mbientlab.metawear.AsyncOperation
-
Checks the status of the result
- isConnected() - Method in interface com.mbientlab.metawear.MetaWearBoard
-
Retrieves the connection state
- isFront() - Method in enum com.mbientlab.metawear.module.Mma8452qAccelerometer.Orientation
-
- isHigh() - Method in interface com.mbientlab.metawear.module.Bmi160Accelerometer.LowHighResponse
-
Checks if the interrupt from from high-g motion.
- isLow() - Method in interface com.mbientlab.metawear.module.Bmi160Accelerometer.LowHighResponse
-
Checks if the interrupt from from low-g motion
- isPortrait() - Method in enum com.mbientlab.metawear.module.Mma8452qAccelerometer.Orientation
-