SerialPassthrough.SpiParameterBuilder

Type Parameters:

T - Return type of the commit function

Enclosing interface:

SerialPassthrough
```
public static interface SerialPassthrough.SpiParameterBuilder<T>
```
Builder to construct common parameters for an SPI read/write operation. The lsbFirst() and useNativePins() parameters are optional and default to false if not set; the data(byte[]) parameter is also optional for a read operation but required for writes. All other parameters are required.

Method Summary

All Methods Instance Methods Abstract Methods
Modifier and Type	Method and Description
`SerialPassthrough.SpiParameterBuilder<T>`	`clockPin(byte pin)` Pin for serial clock
`T`	`commit()` Commit the parameters
`SerialPassthrough.SpiParameterBuilder<T>`	`data(byte[] data)` Data to write to the sensor.
`SerialPassthrough.SpiParameterBuilder<T>`	`frequency(SerialPassthrough.SpiFrequency freq)` SPI operating frequency
`SerialPassthrough.SpiParameterBuilder<T>`	`lsbFirst()` Call to have LSB sent first
`SerialPassthrough.SpiParameterBuilder<T>`	`misoPin(byte pin)` Pin for master input, slave output
`SerialPassthrough.SpiParameterBuilder<T>`	`mode(byte mode)` SPI operating mode, see SPI Wiki Page for details on the mode values
`SerialPassthrough.SpiParameterBuilder<T>`	`mosiPin(byte pin)` Pin for master output, slave input
`SerialPassthrough.SpiParameterBuilder<T>`	`slaveSelectPin(byte pin)` Pin for slave select
`SerialPassthrough.SpiParameterBuilder<T>`	`useNativePins()` Call to use the nRF pin mappings rather than the GPIO pin mappings

- Method Detail
  - data
```
SerialPassthrough.SpiParameterBuilder<T> data(byte[] data)
```
    Data to write to the sensor. If used with a read operation, the data will be written prior to the read
    
    Parameters:
    
    data - Data to write
    
    Returns:
    
    Calling object
  - slaveSelectPin
```
SerialPassthrough.SpiParameterBuilder<T> slaveSelectPin(byte pin)
```
    Pin for slave select
    
    Parameters:
    
    pin - Pin value
    
    Returns:
    
    Calling object
  - clockPin
```
SerialPassthrough.SpiParameterBuilder<T> clockPin(byte pin)
```
    Pin for serial clock
    
    Parameters:
    
    pin - Pin value
    
    Returns:
    
    Calling object
  - mosiPin
```
SerialPassthrough.SpiParameterBuilder<T> mosiPin(byte pin)
```
    Pin for master output, slave input
    
    Parameters:
    
    pin - Pin value
    
    Returns:
    
    Calling object
  - misoPin
```
SerialPassthrough.SpiParameterBuilder<T> misoPin(byte pin)
```
    Pin for master input, slave output
    
    Parameters:
    
    pin - Pin value
    
    Returns:
    
    Calling object
  - lsbFirst
```
SerialPassthrough.SpiParameterBuilder<T> lsbFirst()
```
    Call to have LSB sent first
    
    Returns:
    
    Calling object
  - mode
```
SerialPassthrough.SpiParameterBuilder<T> mode(byte mode)
```
    SPI operating mode, see SPI Wiki Page for details on the mode values
    
    Parameters:
    
    mode - Value between [0, 3]
    
    Returns:
    
    Calling object
  - frequency
```
SerialPassthrough.SpiParameterBuilder<T> frequency(SerialPassthrough.SpiFrequency freq)
```
    SPI operating frequency
    
    Parameters:
    
    freq - Operating frequency
    
    Returns:
    
    Calling object
  - useNativePins
```
SerialPassthrough.SpiParameterBuilder<T> useNativePins()
```
    Call to use the nRF pin mappings rather than the GPIO pin mappings
    
    Returns:
    
    Calling object
  - commit
```
T commit()
```
    Commit the parameters

Interface SerialPassthrough.SpiParameterBuilder<T>

Method Summary

Method Detail

data

slaveSelectPin

clockPin

mosiPin

misoPin

lsbFirst

mode

frequency

useNativePins

commit