ilius_faisal
About
- Username
- ilius_faisal
- Joined
- Visits
- 69
- Last Active
- Roles
- Member
Comments
-
Hello Laura, Thanks for your reply. Actually all our six sensors are showing the same behavior. I am attaching simultaneous data from two different boards below. And if it is because of the vibration motor then why it is only affecting only x and …
-
@Eric said: @Eric said: You can't directly retrieve the resistance. You can instead read the voltage at GPIO 0 and use that to calculate the thermistor's resistance: https://mbientlab.com/androiddocs/latest/gpio.html#analog-da…
-
Hello, sample metawear android app I am getting the Temperature value in Celsius directly using an external thermistor. But could you please explain to me how the temperature value is calculated or converted? Could you please direct me to the androi…
-
Ya, I am using my thermistor to measure the change in Skin temperature. The sensor should in the contact of the skin.
-
I am using a simple 10K Thermistor. The thermistor is hooked up the GPIO0 and the 3V pin on the MetaSensor board. a 10K bias resistor is hooked up in series between GPIO1 and GPIO0. In the tutorial, it is said that "To measure the temperature, we m…
-
Thanks, I connected the sensors and able to communicate. But Now My question is how to get the resistance values of the external sensors... Could you please tell me how to acquire the raw data from those sensors...
-
I need to connect GSR and temp sensors. So my question is: * can I add two external sensors (GSR and Temp) with one board? * How to configure those sensors to get the raw data via Bluetooth?