Laura
About
- Username
- Laura
- Joined
- Visits
- 3,668
- Last Active
- Roles
- Administrator
Comments
-
Did you try the MetaWear App on iOS? I am not talking about the MetaBase App.
-
I am currently looking into it but not able to reproduce so far.
-
It causes a short and can damage the board.
-
* It is used in some examples but not others. There's no rule that you have to use it. * I am not sure what you mean by first 4 values.
-
No you can turn on the sensors at the same time, this was just to help you troubleshoot and make sure the issue is with your code and not the sensors. If the humidity works then that's good. Now try to add the temperature.
-
You can solder an extra button but it won't be able to be a reset button. Now what you can do is add a button to one of the battery leads and it would turn the battery on and off (effectively turning the metawear on and off).
-
Not enough information to comment.
-
The log data is not erased during a soft reset.
-
you can update npm, you just have to be careful about the node version only.
-
That's not 524Kb, that's the number of samples. 524288 data samples
-
Use MetaWear App
-
No
-
Try doing only one thing at a time before adding more sensors. Are you able to do just the humidity?
-
IOS is the most supported.
-
Did you wait a long time to download the data?
-
Follow the steps at www.mbientlab.com/troubleshooting. Also try to leave the MMR plugged in while using the MetaWear App.
-
Use macros to persist the device name.
-
See our tutorials calculator section
-
You can not and should not try to update the firmware or it will put the device in MetaBoot automatically.
-
Not enough information.
-
Sounds like everything is working but you are not pressing the button to connect to the board. Can you provide some videos or photos?
-
You have to select it to connect?
-
It's probably still connected to the MetaBase so it can't connect to the MetaWear App.
-
@abdalrahman9, Again sorry, the MMS is taking up all of my time. When this is done, maybe we can work together to write a documentation section on how to tare the sensors in hardware and software.
-
Can we run the same script to get the remaining 600 logs during the next connect? Yes What will happen to the remaining 600 logs? They stay in memory, they only get deleted after they are successful downloaded What's the best way to test this beha…
-
3D models are available in the documentation section of our website.
-
Unfortunately I had to backlog it for now since we are releasing the MMS. I am hoping it will be done by the end of the month. I will keep you updated. Sorry about this.
-
Our CE certification included the battery safety test. Additionally, the battery vendors we work with provide us with their MSDS and other available certifications. That being said, we change batteries often as battery vendors availability fluctua…
-
Just remember the mag is not in the same orientation as the gyro/acc. I don't have time to look at everything right now since I am working on the MMS release but I think you are on the right track.
-
First, you are not setting the ODR correctly; you need to use hard coded params: MBL_MW_ACC_BOSCH_RANGE_4G Second, you need to make sure that if you set it at 800z, that you are logging and not streaming.