Ishwinder

Comments

• I tried on iOS, device is not coming in scan list

  in CPRO stuck in Metaboot Comment by Ishwinder May 2018
• My device is in exactly same state. Does it work with iOS ?

  in CPRO stuck in Metaboot Comment by Ishwinder May 2018
• with Metabase, was able to connect from Diagnostic tab. Firmware version on device is 0.2.1. When trying to update it shows error "operation failed. ensure the firmware targets that device type and version"

  in MetaBoot mode after firmware update Comment by Ishwinder May 2018
• It was working before. Was collecting data with following configuration.  //configuring Accelerometer//    Accelerometer.ConfigEditor<?> editor = accelerometer.configure();    editor.odr(100f);    editor.range(16f);    editor.commit(); /…

  in Not getting data from Accelero/Gyro, Have to do hard reset Comment by Ishwinder October 2017
• Hi, I tried all troubleshooting steps but of no help. I currently have firmware version 1.3.4 on board. Is there any other firmware revision I can try on this board. Just quick recap on the issue. I am getting error "Accelerometer module (sens…

  in Not getting data from Accelero/Gyro, Have to do hard reset Comment by Ishwinder October 2017
• No luck with this MetamotionR chip. Not able to start accelero or gyro from this chip. I am getting error " Accelerometer module (sensor) is not supported on this board" if i start accelero and similar error for Gyro. Updated firmware from metawear…

  in Not getting data from Accelero/Gyro, Have to do hard reset Comment by Ishwinder September 2017
• Hi, Sorry for delayed response. I checked our connection parameters and those were same as given in documentation for data high frequency.  We are doing reset and working on the modules as of now. MetawearRG works fine after reset but MeatMotionR …

  in Not getting data from Accelero/Gyro, Have to do hard reset Comment by Ishwinder August 2017
• When I said "Metabase worked" it was an answer to question whether it worked after hard reset. Please read the full thread. models: MotoG4, Samsung Galaxy G2 //configuring Accelerometer//    Accelerometer.ConfigEditor<?> editor = acceleromet…

  in Not getting data from Accelero/Gyro, Have to do hard reset Comment by Ishwinder August 2017
• We are using our own app and I cannot share the code of that here. Only when we get some issue with Board is when we test it with metabase and metawear. We are using 3 boards and got issue with 2 of these. We have ordered another 5 which we will be …

  in Not getting data from Accelero/Gyro, Have to do hard reset Comment by Ishwinder August 2017
• Hi, Sorry for late response. -> We tried it on different devices with different versions of android OS. But it failed on all. -> Yes, MetaBase and Metawear worked fine after shorting the pins. -> We used metawear app downloaded from playst…

  in Not getting data from Accelero/Gyro, Have to do hard reset Comment by Ishwinder August 2017
• Issue is sporadic. We are building our own custom app so getting this issue on that app as well as metawear. We are using Android app and Metawear RG board. With metabase, it is not even able to connect. Here are details. 1. Metawear - Able to con…

  in Not getting data from Accelero/Gyro, Have to do hard reset Comment by Ishwinder July 2017