Sampling magnometer

Comments

• Laura

  May 2020 edited May 2020

  Please don't use this, it is for advanced users only (you can skip it).
• gilhalell

  June 2020

  so can you tell me what line of code is needed in order to set the magnometer sampling rate?
• Laura

  June 2020 edited June 2020

  You are right, the only way to change the sample rate of the mag (which we don't recommend, we prefer people use the defaul) is to use "mbl_mw_mag_bmm150_configure".

  The data types for the configure API call:

  • libmetawear.mbl_mw_mag_bmm150_configure.argtypes= [c_void_p, c_ushort, c_ushort, c_int]
  • mbl_mw_mag_bmm150_configure ( const MblMwMetaWearBoard * board, uint16_t xy_reps, uint16_t z_reps, MblMwMagBmm150Odr odr)

  
  

  The way the magnetomter works is by oversampling (repeat measurement). This is how it gets better resolution.

  The "reps" are the number of samples the magnetometer will average before sending out a final value at the requested sampling frequency/rate.

  The acceptable magnetometer sampling rates:
  class MagBmm150Odr:
  _10Hz = 0
  _2Hz = 1
  _6Hz = 2
  _8Hz = 3
  _15Hz = 4
  _20Hz = 5
  _25Hz = 6
  _30Hz = 7

  Take a look at our test code: https://github.com/mbientlab/MetaWear-SDK-Cpp/blob/master/test/test_magnetometer_bmm150.py
  CPP docs for reference: https://mbientlab.com/cppdocs/latest/magnetometer.html
  CPP API docs for reference: https://mbientlab.com/documents/metawear/cpp/0/magnetometer__bmm150_8h.html

  Example usage:

  mbl_mw_mag_bmm150_configure(board, 9, 15, MBL_MW_MAG_BMM150_ODR_25Hz);
  

  More example:

  let magXYReps: UInt16 = 3
  let magZReps: UInt16 = 3
  let magFreq = MBL_MW_MAG_BMM150_ODR_25Hz
  mbl_mw_mag_bmm150_configure(device.board, magXYReps, magZReps, magFreq)