- latency(int) - Method in interface com.mbientlab.metawear.module.AccelerometerMma8452q.TapConfigEditor
-
Set the wait time between the end of the 1st shock and when the 2nd shock can be detected
- Led - Interface in com.mbientlab.metawear.module
-
Ultra bright RGB light emitting diode
- Led.Color - Enum in com.mbientlab.metawear.module
-
Enumeration of available colors on the LED
- Led.PatternEditor - Interface in com.mbientlab.metawear.module
-
Interface to edit pattern attributes
- Led.PatternPreset - Enum in com.mbientlab.metawear.module
-
- limit(int) - Method in interface com.mbientlab.metawear.builder.RouteComponent
-
Reduce the amount of data allowed through such that the output data rate matches the delay
- limit(Passthrough, short) - Method in interface com.mbientlab.metawear.builder.RouteComponent
-
Only allow data through under certain user controlled conditions
- linearAcceleration() - Method in interface com.mbientlab.metawear.module.SensorFusionBosch
-
Get an implementation of the AsyncDataProducer interface for linear acceleration,
represented by the
Acceleration class.
- loadBoardAttributes() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- LocalBinder() - Constructor for class com.mbientlab.metawear.android.BtleService.LocalBinder
-
- localDisconnectAsync() - Method in interface com.mbientlab.metawear.impl.platform.BtleGatt
-
A disconnect attempted initiated by the Android device
- localRetrieve(String) - Method in interface com.mbientlab.metawear.impl.platform.IO
-
Retrieves data saved locally to the device
- localSave(String, byte[]) - Method in interface com.mbientlab.metawear.impl.platform.IO
-
Save the data to the local device
- log(Subscriber) - Method in interface com.mbientlab.metawear.builder.RouteComponent
-
Records the input data to the on-board logger, retrieved when a log download is started
- Logging - Interface in com.mbientlab.metawear.module
-
Firmware feature that saves data to the on-board flash memory
- Logging.DownloadError - Enum in com.mbientlab.metawear.module
-
Types of errors encountered during a log download
- Logging.LogDownloadErrorHandler - Interface in com.mbientlab.metawear.module
-
Handler for processing download errors
- Logging.LogDownloadUpdateHandler - Interface in com.mbientlab.metawear.module
-
Handler for processing download updates
- logWarn(String, String) - Method in interface com.mbientlab.metawear.impl.platform.IO
-
Outputs a warn level message to the logger
- logWarn(String, String, Throwable) - Method in interface com.mbientlab.metawear.impl.platform.IO
-
Outputs a warn level message to the logger with an exception or error associated with the message
- lookupObserver(int) - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- lookupObserver(int) - Method in interface com.mbientlab.metawear.MetaWearBoard
-
Retrieves an observer
- lookupRoute(int) - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- lookupRoute(int) - Method in interface com.mbientlab.metawear.MetaWearBoard
-
Retrieves a route
- lookupScheduledTask(byte) - Method in interface com.mbientlab.metawear.module.Timer
-
- lookupStrand(byte) - Method in interface com.mbientlab.metawear.module.NeoPixel
-
Find the object corresponding to the strand number
- lowDuration(int) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.LowHighConfigEditor
-
Set the minimum amount of time the acceleration must stay below (ths + hys) for an interrupt
- lowGMode(AccelerometerBosch.LowGMode) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.LowHighConfigEditor
-
Set mode for low-g detection
- lowHigh() - Method in interface com.mbientlab.metawear.module.AccelerometerBosch
-
Get an implementation of the LowHighDataProducer interface
- LowHighResponse(boolean, boolean, boolean, boolean, boolean, Sign) - Constructor for class com.mbientlab.metawear.module.AccelerometerBosch.LowHighResponse
-
- lowHysteresis(float) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.LowHighConfigEditor
-
Set the hysteresis level for low-g interrupt
- lowIntensity(byte) - Method in interface com.mbientlab.metawear.module.Led.PatternEditor
-
Set the intensity value of the low state
- lowpass(byte) - Method in interface com.mbientlab.metawear.builder.RouteComponent
-
Applies a low pass filter over the input data.
- lowThreshold(float) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.LowHighConfigEditor
-
Set the threshold that triggers a low-g interrupt
- lsbFirst() - Method in interface com.mbientlab.metawear.module.SerialPassthrough.SpiParameterBuilder
-
Call to have LSB sent first