A B C D E F G H I J L M N O P Q R S T U V W X Y Z

G

gain(AmbientLightLtr329.Gain) - Method in interface com.mbientlab.metawear.module.AmbientLightLtr329.ConfigEditor

Set the gain setting

gain(ColorTcs34725.Gain) - Method in interface com.mbientlab.metawear.module.ColorTcs34725.ConfigEditor

Set the analog gain

gain(Gsr.Gain) - Method in interface com.mbientlab.metawear.module.Gsr.ConfigEditor

Sets the gain applied to the circuit

generateIdentifier(int) - Method in interface com.mbientlab.metawear.Route

Generates a string identifying the data producer chain the subscriber is receiving data from.

getFirmware() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

getMacAddress() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

getMacAddress() - Method in interface com.mbientlab.metawear.MetaWearBoard

Retrieves the MAC address of the board

getMetaWearBoard(BluetoothDevice) - Method in class com.mbientlab.metawear.android.BtleService.LocalBinder

Instantiates a MetaWearBoard class

getModel() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

getModel() - Method in interface com.mbientlab.metawear.MetaWearBoard

Determines the board model of the currently connected device

getModelNumber() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

getModelString() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

getModelString() - Method in interface com.mbientlab.metawear.MetaWearBoard

Same behavior as MetaWearBoard.getModel() except the returned value is a friendly name rather than an enum

getModule(Class<T>) - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

getModule(Class<T>) - Method in interface com.mbientlab.metawear.MetaWearBoard

Retrieves a reference to the requested module if supported.

getModuleOrThrow(Class<T>) - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

getModuleOrThrow(Class<T>) - Method in interface com.mbientlab.metawear.MetaWearBoard

Retrieves a reference to the requested module if supported, throws a checked exception if the function fails.

getOdr() - Method in interface com.mbientlab.metawear.module.Accelerometer

Get the output data rate.

getRange() - Method in interface com.mbientlab.metawear.module.Accelerometer

Get the data range.

getVirtualPin(byte) - Method in interface com.mbientlab.metawear.module.Gpio

Gets an object representing a virtual pin for data directed to it by the Gpio.Analog.read(byte, byte, short, byte) method

Gpio - Interface in com.mbientlab.metawear.module

General purpose I/O pins for connecting external sensors

Gpio.Analog - Interface in com.mbientlab.metawear.module

Measures analog data from a gpio pin

Gpio.Pin - Interface in com.mbientlab.metawear.module

Represents one GPIO pin

Gpio.PinChangeType - Enum in com.mbientlab.metawear.module

Pin change types

Gpio.PullMode - Enum in com.mbientlab.metawear.module

Input pin configuration types

gravity() - Method in interface com.mbientlab.metawear.module.SensorFusionBosch

Get an implementation of the AsyncDataProducer interface for the acceleration from gravity vector, represented by the Acceleration class.

green - Variable in class com.mbientlab.metawear.module.ColorTcs34725.ColorAdc

greenName() - Method in interface com.mbientlab.metawear.module.ColorTcs34725.ColorAdcDataProducer

Get the name for green adc data

Gsr - Interface in com.mbientlab.metawear.module

Interacts with a GSR (galvanic skin response) sensor

Gsr.ConfigEditor - Interface in com.mbientlab.metawear.module

Interface for configuring GSR settings

Gsr.ConstantVoltage - Enum in com.mbientlab.metawear.module

Voltages that can be applied to the GSR electrodes

Gsr.Gain - Enum in com.mbientlab.metawear.module

Gains that can be applied to the GSR circuit

GyroBmi160 - Interface in com.mbientlab.metawear.module

Sensor on the BMI160 IMU measuring angular velocity

GyroBmi160.AngularVelocityDataProducer - Interface in com.mbientlab.metawear.module

Reports measured angular velocity values from the gyro.

GyroBmi160.ConfigEditor - Interface in com.mbientlab.metawear.module

Interface to configure parameters for measuring angular velocity

GyroBmi160.FilterMode - Enum in com.mbientlab.metawear.module

GyroBmi160.OutputDataRate - Enum in com.mbientlab.metawear.module

Operating frequency of the gyro

GyroBmi160.Range - Enum in com.mbientlab.metawear.module

Supported angular rate measurement range

gyroExtra(Object...) - Method in interface com.mbientlab.metawear.module.SensorFusionBosch.ConfigEditor

Extra configuration settings for the gyroscope

gyroRange(SensorFusionBosch.GyroRange) - Method in interface com.mbientlab.metawear.module.SensorFusionBosch.ConfigEditor

Sets the gyro data range

gyroscope - Variable in class com.mbientlab.metawear.module.SensorFusionBosch.CalibrationData

Current calibration accuracy values for the accelerometer, gyroscope, and magnetometer respectively

gyroscope - Variable in class com.mbientlab.metawear.module.SensorFusionBosch.CalibrationState

Current calibration accuracy for the accelerometer, gyroscope, and magnetometer

A B C D E F G H I J L M N O P Q R S T U V W X Y Z