- Haptic - Interface in com.mbientlab.metawear.module
-
Provides haptic feedback in the form of a vibrational motor or buzzer
- HARDWARE_REVISION - Static variable in class com.mbientlab.metawear.impl.platform.DeviceInformationService
-
Revision for the hardware within the device
- hardwareRev - Variable in class com.mbientlab.metawear.impl.dfu.Image
-
- hardwareRevision - Variable in class com.mbientlab.metawear.DeviceInformation
-
Revision of the hardware on the device, characteristic 0x2A27
- hashCode() - Method in class com.mbientlab.metawear.DeviceInformation
-
- hashCode() - Method in class com.mbientlab.metawear.impl.dfu.Image
-
- hashCode() - Method in class com.mbientlab.metawear.impl.platform.BtleGattCharacteristic
-
- hashCode() - Method in class com.mbientlab.metawear.module.AccelerometerBosch.AnyMotion
-
- hashCode() - Method in class com.mbientlab.metawear.module.AccelerometerBosch.LowHighResponse
-
- hashCode() - Method in class com.mbientlab.metawear.module.AccelerometerBosch.Tap
-
- hashCode() - Method in class com.mbientlab.metawear.module.AccelerometerMma8452q.Movement
-
- hashCode() - Method in class com.mbientlab.metawear.module.AccelerometerMma8452q.Tap
-
- hashCode() - Method in class com.mbientlab.metawear.module.ColorTcs34725.ColorAdc
-
- hashCode() - Method in class com.mbientlab.metawear.module.IBeacon.Configuration
-
- hashCode() - Method in class com.mbientlab.metawear.module.SensorFusionBosch.CalibrationData
-
- hashCode() - Method in class com.mbientlab.metawear.module.SensorFusionBosch.CalibrationState
-
- hashCode() - Method in class com.mbientlab.metawear.module.SensorFusionBosch.CorrectedAcceleration
-
- hashCode() - Method in class com.mbientlab.metawear.module.SensorFusionBosch.CorrectedAngularVelocity
-
- hashCode() - Method in class com.mbientlab.metawear.module.SensorFusionBosch.CorrectedMagneticField
-
- hashCode() - Method in class com.mbientlab.metawear.module.Settings.BatteryState
-
- hashCode() - Method in class com.mbientlab.metawear.module.Settings.BleAdvertisementConfig
-
- hashCode() - Method in class com.mbientlab.metawear.module.Settings.BleConnectionParameters
-
- heading() - Method in class com.mbientlab.metawear.data.EulerAngles
-
Gets the heading angle
- highDuration(int) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.LowHighConfigEditor
-
Set the minimum amount of time the acceleration sign does not change for an interrupt
- highGx - Variable in class com.mbientlab.metawear.module.AccelerometerBosch.LowHighResponse
-
True if the x-axis triggered high-g interrupt
- highGy - Variable in class com.mbientlab.metawear.module.AccelerometerBosch.LowHighResponse
-
True if the y-axis triggered high-g interrupt
- highGz - Variable in class com.mbientlab.metawear.module.AccelerometerBosch.LowHighResponse
-
True if the z-axis triggered high-g interrupt
- highHysteresis(float) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.LowHighConfigEditor
-
Set the hysteresis level for clearing the high-g interrupt
- highIntensity(byte) - Method in interface com.mbientlab.metawear.module.Led.PatternEditor
-
Set the intensity value of the high state
- highpass(byte) - Method in interface com.mbientlab.metawear.builder.RouteComponent
-
Applies a high pass filter over the input data, available in firmware v1.3.4 and later
- highSign - Variable in class com.mbientlab.metawear.module.AccelerometerBosch.LowHighResponse
-
Direction of the high-g motion interrupt
- highThreshold(float) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.LowHighConfigEditor
-
Set the threshold for clearing high-g interrupt
- highTime(short) - Method in interface com.mbientlab.metawear.module.Led.PatternEditor
-
Set how long the pulse stays in the high state
- hold() - Method in interface com.mbientlab.metawear.module.NeoPixel.Strand
-
Enables strand holding.
- holdTime(AccelerometerBma255.FlatHoldTime) - Method in interface com.mbientlab.metawear.module.AccelerometerBma255.FlatConfigEditor
-
- holdTime(AccelerometerBmi160.FlatHoldTime) - Method in interface com.mbientlab.metawear.module.AccelerometerBmi160.FlatConfigEditor
-
- holdTime(float) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.FlatConfigEditor
-
Set the delay for which the flat value must remain stable for a flat interrupt.
- HumidityBme280 - Interface in com.mbientlab.metawear.module
-
Sensor on the BME280 environmental sensor measuring relative humidity
- HumidityBme280.OversamplingMode - Enum in com.mbientlab.metawear.module
-
Available oversampling settings for the sensor
- hysteresis(float) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.OrientationConfigEditor
-
Set the hysteresis offset for portrait/landscape detection