A B C D E F G H I J L M N O P Q R S T U V W X Y Z

C

calibrate() - Method in interface com.mbientlab.metawear.module.Gsr

Initiates automatic calibration.

calibrate(CancellationToken, long, SensorFusionBosch.CalibrationStateUpdateHandler) - Method in interface com.mbientlab.metawear.module.SensorFusionBosch

Convenience method to continuously poll the calibration state until the required IMUs are in a high accuracy state

calibrate(CancellationToken, SensorFusionBosch.CalibrationStateUpdateHandler) - Method in interface com.mbientlab.metawear.module.SensorFusionBosch

Variant of SensorFusionBosch.calibrate(CancellationToken, long, CalibrationStateUpdateHandler) with polling period set to 1000ms

calibrate(CancellationToken, long) - Method in interface com.mbientlab.metawear.module.SensorFusionBosch

Variant of SensorFusionBosch.calibrate(CancellationToken, long, CalibrationStateUpdateHandler) with no calibration state updates

calibrate(CancellationToken) - Method in interface com.mbientlab.metawear.module.SensorFusionBosch

Variant of SensorFusionBosch.calibrate(CancellationToken, long, CalibrationStateUpdateHandler) with polling period set to 1000ms and no calibration state updates

CalibrationData(byte[], byte[], byte[]) - Constructor for class com.mbientlab.metawear.module.SensorFusionBosch.CalibrationData

CalibrationState(SensorFusionBosch.CalibrationAccuracy, SensorFusionBosch.CalibrationAccuracy, SensorFusionBosch.CalibrationAccuracy) - Constructor for class com.mbientlab.metawear.module.SensorFusionBosch.CalibrationState

cancel() - Method in class com.mbientlab.metawear.impl.platform.TimedTask

CartesianAxis - Enum in com.mbientlab.metawear.data

Created by etsai on 11/13/16.

channels() - Method in interface com.mbientlab.metawear.module.Gsr

Gets a list of available conductance channels

charge - Variable in class com.mbientlab.metawear.module.Settings.BatteryState

Percent charged, between [0, 100]

chargeName() - Method in interface com.mbientlab.metawear.module.Settings.BatteryDataProducer

Get the name for battery charge data

chargeStatus() - Method in interface com.mbientlab.metawear.module.Settings

Gets an object to control charging status notifications

checkForFirmwareUpdateAsync() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

checkForFirmwareUpdateAsync() - Method in interface com.mbientlab.metawear.MetaWearBoard

Checks if there is a newer version of the firmware available for your board.

clear - Variable in class com.mbientlab.metawear.module.ColorTcs34725.ColorAdc

clear() - Method in interface com.mbientlab.metawear.module.DataProcessor.PackerEditor

Clears buffer of accumulated inputs

clear(byte, byte) - Method in interface com.mbientlab.metawear.module.NeoPixel.Strand

Clears the LEDs in the given range

clearDownloadCache() - Method in class com.mbientlab.metawear.android.BtleService.LocalBinder

Removes downloaded files cached on the Android device

clearEntries() - Method in interface com.mbientlab.metawear.module.Logging

Clear all stored logged data from the board.

clearName() - Method in interface com.mbientlab.metawear.module.ColorTcs34725.ColorAdcDataProducer

Get the name for clear adc data

clearOutput() - Method in interface com.mbientlab.metawear.module.Gpio.Pin

Clear the pin's output voltage i.e.

clearSerializedState(BluetoothDevice) - Method in class com.mbientlab.metawear.android.BtleService.LocalBinder

Removes the saved serialized state of the MetaWearBoard object associated with the BluetoothDevice object

clockPin(byte) - Method in interface com.mbientlab.metawear.module.SerialPassthrough.SpiParameterBuilder

Pin for serial clock

closestIndex(float[], float) - Static method in class com.mbientlab.metawear.impl.Util

CodeBlock - Interface in com.mbientlab.metawear

Interface for saving MetaBase commands to the board

ColorAdc(int, int, int, int) - Constructor for class com.mbientlab.metawear.module.ColorTcs34725.ColorAdc

ColorTcs34725 - Interface in com.mbientlab.metawear.module

Color light-to-digital converter by TAOS that can sense red, green, blue, and clear light

ColorTcs34725.ColorAdc - Class in com.mbientlab.metawear.module

Wrapper class encapsulating adc data from the sensor

ColorTcs34725.ColorAdcDataProducer - Interface in com.mbientlab.metawear.module

Extension of the ForcedDataProducer interface providing names for the component values of the color adc data

ColorTcs34725.ConfigEditor - Interface in com.mbientlab.metawear.module

Configurable parameters for the color detector

ColorTcs34725.Gain - Enum in com.mbientlab.metawear.module

Analog gain scales

com.mbientlab.metawear - package com.mbientlab.metawear

Classes for interacting with a MetaWear board

com.mbientlab.metawear.android - package com.mbientlab.metawear.android

Android implementation of the interfaces required to use the JseMetaWearBoard class

com.mbientlab.metawear.builder - package com.mbientlab.metawear.builder

Builders for constructing a data route

com.mbientlab.metawear.builder.filter - package com.mbientlab.metawear.builder.filter

Options for configuring data filters

com.mbientlab.metawear.builder.function - package com.mbientlab.metawear.builder.function

Supported functions for the data mapper

com.mbientlab.metawear.builder.predicate - package com.mbientlab.metawear.builder.predicate

Options for predicate configuration

com.mbientlab.metawear.data - package com.mbientlab.metawear.data

General wrapper classes encapsulating sensor data

com.mbientlab.metawear.impl - package com.mbientlab.metawear.impl

Implementation of the MetaWear API by MbientLab

com.mbientlab.metawear.impl.dfu - package com.mbientlab.metawear.impl.dfu

com.mbientlab.metawear.impl.platform - package com.mbientlab.metawear.impl.platform

Helper classes for keeping the API implementation platform agnostic

com.mbientlab.metawear.module - package com.mbientlab.metawear.module

Available modules on the Metawear boards

commit() - Method in interface com.mbientlab.metawear.ConfigEditorBase

Write the configuration to the board

commit() - Method in interface com.mbientlab.metawear.module.AccelerometerBmi160.StepConfigEditor

Write the configuration to the sensor

commit() - Method in interface com.mbientlab.metawear.module.Led.PatternEditor

Write the settings to the board

commit() - Method in interface com.mbientlab.metawear.module.SerialPassthrough.SpiParameterBuilder

Commit the parameters

compareTo(Version) - Method in class com.mbientlab.metawear.impl.Version

Comparison - Enum in com.mbientlab.metawear.builder.filter

Supported comparison operations

ComparisonOutput - Enum in com.mbientlab.metawear.builder.filter

Output modes for the comparison filter, only supported by firmware v1.2.3 or higher

ConfigEditorBase - Interface in com.mbientlab.metawear

Base class for configuration editor classes.

Configurable<T extends ConfigEditorBase> - Interface in com.mbientlab.metawear

Attribute indicating the object can be configured

Configuration() - Constructor for class com.mbientlab.metawear.module.IBeacon.Configuration

Configuration(UUID, short, short, short, byte, byte) - Constructor for class com.mbientlab.metawear.module.IBeacon.Configuration

configure(RouteComponent) - Method in interface com.mbientlab.metawear.builder.RouteBuilder

Called by the API with the RouteComponent corresponding to the entry point of the data route

configure() - Method in interface com.mbientlab.metawear.Configurable

Configure the object

configure() - Method in interface com.mbientlab.metawear.module.AccelerometerBma255

Configure the BMA255 accelerometer

configure() - Method in interface com.mbientlab.metawear.module.AccelerometerBma255.FlatDataProducer

Configure the flat detection algorithm

configure() - Method in interface com.mbientlab.metawear.module.AccelerometerBmi160

Configure the BMI160 accelerometer

configure() - Method in interface com.mbientlab.metawear.module.AccelerometerBmi160.FlatDataProducer

Configure the flat detection algorithm

configure() - Method in interface com.mbientlab.metawear.module.AccelerometerBmi270

Configure the BMI270 accelerometer

configure() - Method in interface com.mbientlab.metawear.module.AccelerometerMma8452q

Configure the MMA8452Q accelerometer

configure() - Method in interface com.mbientlab.metawear.module.BarometerBme280

Configures BME280 barometer

configure() - Method in interface com.mbientlab.metawear.module.BarometerBmp280

Configures BMP280 barometer

configure(byte, byte, boolean) - Method in interface com.mbientlab.metawear.module.Temperature.ExternalThermistor

Configures the settings for the thermistor

connectAsync() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

connectAsync(long) - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

connectAsync() - Method in interface com.mbientlab.metawear.impl.platform.BtleGatt

Connects to the GATT server on the remote device

connectAsync() - Method in interface com.mbientlab.metawear.MetaWearBoard

Establishes a Bluetooth Low Energy connection to the MetaWear board

connectAsync(long) - Method in interface com.mbientlab.metawear.MetaWearBoard

Establishes a Bluetooth Low Energy connection to the MetaWear board

connectWithRetryAsync(int) - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

connectWithRetryAsync(int) - Method in interface com.mbientlab.metawear.MetaWearBoard

Establishes a Bluetooth Low Energy connection to the MetaWear board

constantVoltage(Gsr.ConstantVoltage) - Method in interface com.mbientlab.metawear.module.Gsr.ConfigEditor

Sets the constant voltage applied to the electrodes

convertToFirmwareUnits(MetaWearBoardPrivate, Number) - Method in class com.mbientlab.metawear.impl.ArrayData

copy(DataTypeBase, Constant.Module, byte, byte, DataAttributes) - Method in class com.mbientlab.metawear.impl.ArrayData

correctedAcceleration() - Method in interface com.mbientlab.metawear.module.SensorFusionBosch

Get an implementation of the AsyncDataProducer interface for corrected acceleration data, represented by the SensorFusionBosch.CorrectedAcceleration class.

CorrectedAcceleration(float, float, float, byte) - Constructor for class com.mbientlab.metawear.module.SensorFusionBosch.CorrectedAcceleration

correctedAngularVelocity() - Method in interface com.mbientlab.metawear.module.SensorFusionBosch

Get an implementation of the AsyncDataProducer interface for corrected angular velocity data, represented by the SensorFusionBosch.CorrectedAngularVelocity class.

CorrectedAngularVelocity(float, float, float, byte) - Constructor for class com.mbientlab.metawear.module.SensorFusionBosch.CorrectedAngularVelocity

correctedMagneticField() - Method in interface com.mbientlab.metawear.module.SensorFusionBosch

Get an implementation of the AsyncDataProducer interface for corrected magnetic field data, represented by the SensorFusionBosch.CorrectedMagneticField class.

CorrectedMagneticField(float, float, float, byte) - Constructor for class com.mbientlab.metawear.module.SensorFusionBosch.CorrectedMagneticField

count() - Method in interface com.mbientlab.metawear.builder.RouteComponent

Counts the number of data samples that have passed through this component and outputs the current count

count(int) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.AnyMotionConfigEditor

Set the number of consecutive slope data points that must be above the threshold for an interrupt to occur

count(byte) - Method in interface com.mbientlab.metawear.module.AccelerometerBosch.SlowMotionConfigEditor

Set the number of consecutive slope data points that must be above the threshold for an interrupt to occur

createAnonymousRoutesAsync() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard

createAnonymousRoutesAsync() - Method in interface com.mbientlab.metawear.MetaWearBoard

Reads the current state of the board and creates anonymous routes based on what data is being logged

createMessage(boolean, MetaWearBoardPrivate, byte[], Calendar, DataPrivate.ClassToObject) - Method in class com.mbientlab.metawear.impl.ArrayData

A B C D E F G H I J L M N O P Q R S T U V W X Y Z