- gain(AmbientLightLtr329.Gain) - Method in interface com.mbientlab.metawear.module.AmbientLightLtr329.ConfigEditor
-
Set the gain setting
- gain(ColorTcs34725.Gain) - Method in interface com.mbientlab.metawear.module.ColorTcs34725.ConfigEditor
-
Set the analog gain
- gain(Gsr.Gain) - Method in interface com.mbientlab.metawear.module.Gsr.ConfigEditor
-
Sets the gain applied to the circuit
- generateIdentifier(int) - Method in interface com.mbientlab.metawear.Route
-
Generates a string identifying the data producer chain the subscriber is receiving data from.
- getFirmware() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- getMacAddress() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- getMacAddress() - Method in interface com.mbientlab.metawear.MetaWearBoard
-
Retrieves the MAC address of the board
- getMetaWearBoard(BluetoothDevice) - Method in class com.mbientlab.metawear.android.BtleService.LocalBinder
-
Instantiates a MetaWearBoard class
- getModel() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- getModel() - Method in interface com.mbientlab.metawear.MetaWearBoard
-
Determines the board model of the currently connected device
- getModelNumber() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- getModelString() - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- getModelString() - Method in interface com.mbientlab.metawear.MetaWearBoard
-
- getModule(Class<T>) - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- getModule(Class<T>) - Method in interface com.mbientlab.metawear.MetaWearBoard
-
Retrieves a reference to the requested module if supported.
- getModuleOrThrow(Class<T>) - Method in class com.mbientlab.metawear.impl.JseMetaWearBoard
-
- getModuleOrThrow(Class<T>) - Method in interface com.mbientlab.metawear.MetaWearBoard
-
Retrieves a reference to the requested module if supported, throws a checked exception if the function fails.
- getOdr() - Method in interface com.mbientlab.metawear.module.Accelerometer
-
Get the output data rate.
- getRange() - Method in interface com.mbientlab.metawear.module.Accelerometer
-
Get the data range.
- getVirtualPin(byte) - Method in interface com.mbientlab.metawear.module.Gpio
-
- Gpio - Interface in com.mbientlab.metawear.module
-
General purpose I/O pins for connecting external sensors
- Gpio.Analog - Interface in com.mbientlab.metawear.module
-
Measures analog data from a gpio pin
- Gpio.Pin - Interface in com.mbientlab.metawear.module
-
Represents one GPIO pin
- Gpio.PinChangeType - Enum in com.mbientlab.metawear.module
-
Pin change types
- Gpio.PullMode - Enum in com.mbientlab.metawear.module
-
Input pin configuration types
- gravity() - Method in interface com.mbientlab.metawear.module.SensorFusionBosch
-
Get an implementation of the AsyncDataProducer interface for the acceleration from gravity vector,
represented by the
Acceleration
class.
- green - Variable in class com.mbientlab.metawear.module.ColorTcs34725.ColorAdc
-
- greenName() - Method in interface com.mbientlab.metawear.module.ColorTcs34725.ColorAdcDataProducer
-
Get the name for green adc data
- Gsr - Interface in com.mbientlab.metawear.module
-
Interacts with a GSR (galvanic skin response) sensor
- Gsr.ConfigEditor - Interface in com.mbientlab.metawear.module
-
Interface for configuring GSR settings
- Gsr.ConstantVoltage - Enum in com.mbientlab.metawear.module
-
Voltages that can be applied to the GSR electrodes
- Gsr.Gain - Enum in com.mbientlab.metawear.module
-
Gains that can be applied to the GSR circuit
- Gyro - Interface in com.mbientlab.metawear.module
-
Sensor on the BMI160 and BMI270 IMU measuring angular velocity
- Gyro.AngularVelocityDataProducer - Interface in com.mbientlab.metawear.module
-
Reports measured angular velocity values from the gyro.
- Gyro.ConfigEditor - Interface in com.mbientlab.metawear.module
-
Interface to configure parameters for measuring angular velocity
- Gyro.FilterMode - Enum in com.mbientlab.metawear.module
-
- Gyro.OutputDataRate - Enum in com.mbientlab.metawear.module
-
Operating frequency of the gyro
- Gyro.Range - Enum in com.mbientlab.metawear.module
-
Supported angular rate measurement range
- GyroBmi160 - Interface in com.mbientlab.metawear.module
-
Extension of the
Gyro
interface providing finer control of the BMI160 accelerometer features
- GyroBmi270 - Interface in com.mbientlab.metawear.module
-
Extension of the
Gyro
interface providing finer control of the BMI270 accelerometer features
- gyroExtra(Object...) - Method in interface com.mbientlab.metawear.module.SensorFusionBosch.ConfigEditor
-
Extra configuration settings for the gyroscope
- gyroRange(SensorFusionBosch.GyroRange) - Method in interface com.mbientlab.metawear.module.SensorFusionBosch.ConfigEditor
-
Sets the gyro data range
- gyroscope - Variable in class com.mbientlab.metawear.module.SensorFusionBosch.CalibrationData
-
Current calibration accuracy values for the accelerometer, gyroscope, and magnetometer respectively
- gyroscope - Variable in class com.mbientlab.metawear.module.SensorFusionBosch.CalibrationState
-
Current calibration accuracy for the accelerometer, gyroscope, and magnetometer