Increase battery capacity while stay thin, coin cell in parallel ?

Hello,

I would like to know if a parallel setup can be made for two coin cell battery (CR2016) in order to stay really thin ...

Thanks,



Comments

  • @alanhortz If you can wire two CR2016 in parallel that would work well as a power source.  Both batteries should be fresh when installed, because lithium coin cells do not tolerate reverse current well -- which the weaker of the two would receive if imbalanced.
  • Hi,

    Any feedback about those thin film rechargeable battery ?

    Thanks,

    Alan
  • @alanhortz

    Interesting technology.

    It would not work off the shelf with MetaWear because there is no protection circuit, battery charge current is a little low, and maximum discharge current is a little underrated.  MetaWear needs to be able to burst around 15-20mA for the radio.

    With their additional circuitry it might work together, it seems they are using a supercap to help with burst current.

    Also consider that the capacity is 700uAh which is about 150x less than our standard battery, so it will not last very long.

    Cheers,
    Matt

  • @matt

    Thanks for the answer, it helps a lot !

    Alan
This discussion has been closed.