Metaware with sleep, input interrupt, and GPIO

Hello,

Which Metaware has deep-sleep function, input interrupt to wake from sleep, and at least two GPIOs available to create a proof-of-concept?

Thanks,

Comments

  • edited March 13

    Thanks Eric for the quick reply.
    I found the datasheet, but the schematic is not listed. Is it possible to get the schematic also?
    Couple of questions not answered in the datasheet:
    1. What is the maximum current consumption of the boards when BLE is active (all other peripherals are off)?
    2. Can one of the GPIOs be used to wake the board from the sleep?
    3. Can it be programmed to wake-up the processor only - without waking up BLE or other peripherals?

  • edited March 13

    The pdf files are datasheets...there is literally a datasheet column...http://mbientlab.com/documentation/

  • I found the datasheet, but the schematic is not listed. Is it possible to get the schematic also?
    Couple of questions not answered in the datasheet:
    1. What is the maximum current consumption of the boards when BLE is active (all other peripherals are off)?
    2. Can one of the GPIOs be used to wake the board from the sleep?
    3. Can it be programmed to wake-up the processor only - without waking up BLE or other peripherals?

  • Don't spam the same post, just link to whatever post you want us to look at. And, don't edit and entire post. All you do is add more confusion to the conversation.

    1. That is listed in the "Operating Specifications".
    2. No, only button or attaching a USB cable
    3. Nothing is active by default except the ble radio. You can set a timeout in the advertising so it doesn't advertise indefinitely.
  • And how do you do "just link to whatever post you want us to look at"?
    Where is "Operating Specifications"?

  • edited March 18

    The datasheet has this information: www.mbientlab.com/documentation

Sign In or Register to comment.