Do not try and update the firmware on any of the MetaWear Sensors it will now put your sensor in the MetaBoot mode and brick your sensor.

After downloading the MetaWear app -- we can see the two devices listed. As we assumed, they are stuck in MetaBoot. When we choose to connect these devices, we get a Warning that the devices are stuck

@organ006 Please download the MetaWear app on one of your mobile devices in addition to MetaBase. There is a toggle switch when scanning that will search for MetaBoot devices and it seems that your de

phones’ bluetooth menu – both devices called “Metaboot”, as compared to our functioning device being called “Metawear” in this menu (screenshot attached to this post). Based on previous posts in this

You can also try to update the firmware but it's likely your cell phone has cached the state and it's not actually in metaboot. In that case, only using a diff phone will work in the short term.

2. If you are stuck in metaboot, you do NOT need to touch the battery or solder anything. It is likely your sensor is working fine but your smartphone has cached the device state. Is there another pho

https://mbientlab.com/community/discussion/2981/for-those-stuck-in-metaboot#latest

however, the sensor is now stuck in the "MetaBoot" mode (also attached a screenshot).

Yes I have tried that. And the device in Metaboot mode does not even show to connect.

in the images show up, the device is still in Metaboot mode. I have also tried updating the firmware on the sensors and that also does not work.

If you use a new iOS device, this shouldn't happen. Basically your iOS device has cached the metaboot state of your MMC even though it is NOT in metaboot.

I use multiple Metamotion C sensors in my research and have had 2 enter Metaboot mode. I only use the accelerometer functionality and switch between logging and streaming the data. I have tried removi

This morning I put the battery in and tried MetaWear and low and behold it worked! Was no longer in MetaBoot.

I launch the app, nothing appears. I toggle the switch for "MetaBoot Mode" and I can see my device. I tap the device, it takes me to another screen then the app immediately closes.

You can not and should not try to update the firmware or it will put the device in MetaBoot automatically.

You can not and should not try to update the firmware or it will put the device in MetaBoot automatically.

I have a MetaTracker from 2019 and it worked fine last time I used it a few months ago. I popped in a new battery, but now it's stuck in Metaboot.

One last thing is to keep pressing the button on the sensor (for 5-6 seconds) until it goes into MetaBoot and see if you can connect that way.

I click Update firmware, then ok, then the message with the loading screen appears and after a second or so i get the error message and my device is in metaboot mode.

Hello İ have 2 MetamotionR sensor. One of these devices is called metawear, the other is called metaboot. İ can connect metaboot , but I could not connect in any way with metawear in Android app, Wind